micro-size completely-in-ear-canal wireless earpiece

Be advised! You get an absolutely invisible communication method using the micro miniature radio earpiece, but the invisibility is achieved by hiding the micro earpiece inside an ear canal.

THE FACT OF YOUR PURCHASE AND USE OF THIS DEVICE MEANS THAT YOU UNDERSTOOD THAT THIS CAN BE POTENTIALLY HARMFUL TO YOUR HEALTH AND THAT YOU USE THE MICRO EARPIECE AT YOUR OWN RISK! IN NO EVENT THE MANUFACTURER WILL BE LIABLE FOR ANY DAMAGES, INCLUDING DAMAGES TO A HEALTH

The earpiece has two ejection strings which are used to remove the earpiece from the ear canal easily with tweezers.

Please have a look at a human ear anatomy: we are interested here in a so-called outer ear and particularly in the ear canal and an eardrum:

The ear canal length is typically 25 millimetres (about 1 inch) long and it is bordered by the eardrum from inside. Bodies can be usually inserted up to 15 millimetres (0.6 inch) deep without any unpleasant feelings. This is enough to hide the earpiece and ejection strings in the most cases, at the same time staying distant from the eardrum. We consider that micro ear units less than 10 mm in length can hide in an ear completely.

Please note that the ear canal width varies in different people. It is generally narrower in women and is wider in men. This is not a problem and you can fully hide the micro earpiece inside the clean ear canal in very most cases.

The ear canal must be thoroughly cleared with a kind of a cotton wool stick prior to inserting the earpiece. This prevents ear wax (cerumen) pieces from possible pressing the eardrum and clogging the earpiece speaker.

ALWAYS INSERT THE EARPIECE BY YOURSELF. THIS IS OBVIOUSLY THE BEST PROTECTION FROM ANY HARM TO YOUR HEALTH. YOU CAN USE AN OTHER PERSON'S HELP ONLY FOR PULLING OUT THE EARPIECE.

The most common anatomical problems and solutions:

- difficulties getting the earpiece out of an ear - you should use rectangular tweezers to pull the earpiece ejection string. Choose tweezers which catch the ejection string reliably. It is usually hard to pull the earpiece manually without enough experience, you can ask for help. Avoid accidental pushing the earpiece to press the eardrum. Always locate the micro ear unit and ejection strings visually before attempting to remove it;

- a pain if pressing the eardrum - the earpiece is placed too deep. Always insert the earpiece just enough to make it invisible from an outside, and no deeper. You can damage the eardrum in case of a forced press. Never apply a force. Never move a head directed to tweezers. Never allow other person to place the earpiece into your ear;

- an anatomically large ear canal diameter can cause the earpiece to fluctuate inside the ear or the earpiece to fall out of the ear, or the earpiece to fall deeper and press the eardrum - you can make the overall earpiece diameter larger with any dielectric material: an insulation tape, an adhesive tape, a rubber tube, etc... Non conductors do not affect a radio signal. Keep the ejection strings' side and an opposite sound output side of the earpiece open.